High quality insulators are important in preventing leakage from the fence line.

It is important to make a good strong knot when tying off end strain insulators. Use a simple twist knot, wrapping the wire around itself at least 4 times, keep the insulator within 200mm (8") of the strainer post to prevent animals pushing between the insulator and strainer post.

When tying off end strain insulators always tie the wires so they strain from the centre of the Insulator.

Strainer Insulators Black poly insulator designed for low strain fences. White glass filled polyester insulator will withstand very high strains. Rounded edges for easy handling. P-42 U Terminal insulator, black with metal insert. Wrap around insulator with metal protector. Flat back. 20" Wrap around insulator with metal protector. Flat back. 24" Insul Tie. Versatile corner post insulator does away with conventional insulators.

Line Insulators Ring insulator with large screw. Heavy duty ring insulator with large screw. Pinlock design for wood post. Claw design for wood post. Pinlock for star post. May be attached to outrigger. Claw for star post. May be attached to outrigger. Large (1-3/8") T-Post insulator. Medium (1-5/16") T-Post insulator. Small (1-3/16") T-Post insulator. X-Small (1-1/16") T-Post insulator. Heavy duty U design porcelain insulator. Double head porcelain Insulator with nails and washers. Round porcelain insulator. Heavy Duty insul-Tube. 40' roll. Heavy Duty insul-Tube. 100' roll. Heavy Duty insul-Tube. 500' roll. Insul-Tube pre cut 4" pieces. Insul-Tube pre cut 6" pieces.

Outriggers WIRE OUTRIGGERS Strainrite offset wire bracket. Porcelain, bilock or claw. Bilock offset wires made of 8 ga. wire. 10" offset with Bilock insulation and extra loop for ground wire with approximately 5" separation. STEEL OUTRIGGERS Heavy duty steel outriggers for wood posts. Side mount or top mount, quick drop-in insulated pig tail. Top mount 6" Side mount 6" Top mount 10" Side mount 10" Top mount 16" Side mount 16" FIBERGLASS OUTRIGGERS Fiberglass outrigger. 3/8" X 12" with long leg clip. Orange pigtail insulator. Fits 3/8" rod firmly. May be used as offset with fiber rod.